For further information on Pulsacoil BP click on the links below:
Pulsacoil BP Thermal Storage
The Pulsacoil BP provides cost-effective hot water with less problems then the previous Pulsacoil 3, Pulsacoil 2000 & Pulsacoil A Class models. It does utilise the use of off-peak electric and is specifically designed for new builds and to replace all Pulsacoil systems.
Pulsacoil BP Information
With the Gledhill Pulsacoil BP being an open vented thermal store, it does not need a temperature or pressure relief valve and therefore does not require any discharge pipe work installed. Part G building regulations
prohibits the connection of a discharge pipe from an unvented cylinder into a soil stack, unless it can be demonstrated that the soil stack can withstand the temperature of the water that is discharged.
This is why a Pulsacoil BP system overcomes the onerous requirement of Part G building regulation. If you are looking at an unvented system please note; plastic soil stacks do not fulfil Part G building regulation requirements (Currently) and can be very difficult to have installed. Also it can be a non cost effective, if you currently have a previous Pulsacoil system.
The Pulsacoil system can be filled manually not needing an overflow or discharge pipe. This allows the Pulsacoil BP system to be positioned anywhere inside a property. Als0 the advanced construction and primary store design means that no annual service is required, unlike with an unvented cylinder.
Additional Benefits With The Pulsacoil BP
Powerful Pressured Hot Water From The Pulsacoil BP
A Pulsacoil BP system allows mains water pressure to push the the internal coil of the cylinder giving the user equal pressure on both hot and cold water taps. This mean you will not experience a drop in water pressure and can enjoy a powerful shower. This also means you can fill your bath tub quicker, losing less heat.
Pulsacoil BP Operates Efficiently
The Pulsacoil BP system was designed so that the energy it needs is minimised, avoiding costly us of electricity by taking advantage of off-peak tariff or rate 2 when installed with a timer.
No Scaling Takes Place In A Pulsacoil BP
The immersion elements in a Pulsacoil BP are situated in the same primary water at all times and this water is not renewed so no scaling takes place, even in hard water areas. Please note that other components associated with the Pulsacoil BP can be affected by scaling and we would highly recommend a “Descaling PCB” be installed, especially in hard water areas.
For more information on Pulsacoil BP please read our Pulsacoil FAQ
Additional Site: Gledhill Pulsacoil
***If you purchase a Pulsacoil BP system from us, we can give you 1 years minimum warranty. We also with give you an additional 5 years sliding scale warranty from the manufacturers. For the most competitive price on this system, call us on 0800 046 1241 to speak to a customer adviser.
We don’t just supply these systems, we will install it for you with one of our in house approved engineers. When you have your system installed by us, we will give you a 1 year parts and labour all included warranty with 5 years manufacturers sliding scale warranty.
Call us today on 0800 046 1241.